Full Chisel Blog

May 17, 2014

Fairbanks Home – door and window sashes

I covered the first phase of the restoration work here.  After the door was stripped of the old paint and cleaned up, several repairs were made using liquid hide glue.  After the glue dried and the surfaces were brought to the correct level, it got several coats of Moses T’s St. John’s Oil, it ended up soaking up a quart of the oil/turpentine mix.

kitchen door repaired

The lower window sashes needed to be replaced and when removing them all of the lower rails did not come out with the rest of the sash, there was so much rot.  The damage is evident on the lower right hand corner of the photograph below.

kitchen window2

The rails and styles are mortised and tennoned together and the mullions are mortised, tennoned and coped to fit the details of the moldings.

new kitchen window sash

lower window sash

window sash oiled

Here are the three lower sashes, glued, pegged, trimmed to size and given a coat of Moses T’s St. John’s Oil. Once the oil has dried the door and sashes will be given an oil based  primer coat, followed after it dries with the finished oil based final coat of paint to match the paint in the house.

Stephen

 

No Comments »

No comments yet.

RSS feed for comments on this post. TrackBack URL

Leave a comment

Powered by WordPress